公司新闻

您的位置:网站首页 > 公司新闻

PP酸雾净化塔

 

一、产品简介:

            聚丙烯(PP塑料):它是一种高密度、无侧链、高结晶必的线性聚合物,具有优良耐酸碱腐蚀等综合性能。

   

   PP酸雾净化塔能有效彻底处理氢氟酸、盐酸雾、硫酸雾、铬酸雾、氰氢酸、硫化氢、氨气、碱蒸汽、福尔马琳、等其他酸碱混合废气及水溶性气体。对于腐蚀性气体(如酸、碱性废气)的治理,目前多采用液体吸收法治理。采用液体吸收法治理该废气,关键在于净化设备的选择。

      目前,我公司自主开发了PP酸雾净化塔,该设备阻力小、能耗低、噪音低、结构紧凑、操作简单、占地面积小、处理效率高和适用范围广的特点。 


二、产品特点:

1.采用填料塔对废气进行净化,适合于连续和间歇排放废气的治理;

2.工艺简单,管理方便、操作及维修相当方便简洁,不会对车间的生产造成任何影响;

3.适用范围广,可同时净化多种污染物;

4.压降较低,操作弹性大,且具有很好的除雾性能;

5.塔体可根据实际情况采用FRP/PP/PVC等材料制作;

6.填料采用高效、低阻的鲍尔环,可彻底地去除气体中的异味、有害物质等。

7.我公司的废气处理塔采用五重废气吸附过滤净化系统,工业废气处理设计周密、层层净化过滤废气,效果较好。


气体由离心通风机压入或吸入进风段,废气通过气液逆流的方式向上流动,至填料层,与喷咀喷出的中和液接触反应。中和反应后的废气继续向上流动至除雾层除雾及水液净化达标后经排风管排入大气中,根据废气各项指标,还可以增加填料层及喷淋装置,可使废气净化更彻底和处理更高浓度的酸雾气体。


五、适用领域:

        本工艺和设备可广泛应用于化工、电子、冶金、电镀、纺织(化纤)、食品、机械制造等行业过程中排放的酸、碱性废气的净化处理。如调味食品、制酸、酸洗、电镀、电解、蓄电池等。

First, product introduction:

Polypropylene (PP plastic): it is a linear polymer with high density, no side chain and high crystallinity. It has excellent comprehensive properties such as acid alkali corrosion resistance and so on.


PP mist purification tower can effectively thorough treatment of hydrofluoric acid, hydrochloric acid, sulfuric acid, chromic acid mist fog fog, hydrogen cyanide, hydrogen sulfide, ammonia, alkali, steam and other mixed Ma Lin Holmes gas and water soluble gas. At present, the treatment of corrosive gas (such as acid and alkaline waste gas) is mostly treated by liquid absorption method. The key to the treatment of the exhaust gas by liquid absorption is the selection of the purification equipment.

At present, our company independently developed the PP mist purification tower, the small resistance, low energy consumption, low noise, compact structure, simple operation, small area and high efficiency and wide application range.



Two. The characteristics of the product:


1. the waste gas is purified by the packing tower, which is suitable for the treatment of continuous and intermittent exhaust gas.

2. the process is simple, the management is convenient, the operation and maintenance are quite convenient and concise. It will not cause any effect on the production of the workshop.

3. the scope of application is wide, and many kinds of pollutants can be purified at the same time.

The 4. pressure drop is low, the operating elasticity is large, and it has good demogging performance.

The 5. pagoda can be made with FRP/PP/PVC and other materials according to the actual situation.

The 6. packing adopts the Bauer ring with high efficiency and low resistance, which can completely remove the odor and harmful substances in the gas.

7. the exhaust gas treatment tower of our company uses five heavy waste gas adsorption filtration purification system, the industrial waste gas treatment is designed carefully, layer layer purify and filter the exhaust gas, the effect is good.


The gas is pressed or inhaled into the air inlet section by a centrifugal fan, and the exhaust gas flows upward through the way of gas-liquid counterflow, to the packing layer, and to contact with the neutral liquid ejected from the nozzle. After neutralization the exhaust gas continues to flow upward to the mist layer and water mist liquid purified water through the exhaust pipe into the atmosphere, according to the indicators of exhaust gas, can also increase the packing layer and the spray device can exhaust gas purification of acid mist more thoroughly and more high concentration.



Five. Application areas:

The technology and equipment can be widely applied to the purification of acid and basic waste gases discharged from chemical industry, electronics, metallurgy, electroplating, textile, chemical industry and other industries. Such as flavoring food, acid making, acid pickling, electroplating, electrolysis, battery and so on.